Tag Archives: Lost in Space

WHOOSH!—UK’s 3-D Design Wiz, Harry Peters, Teams Up With Famed U.S. Customizers Wayne Faucher and Roland Delaune to Create New 1:6 Bell Rocket Pack

jetpack7

Prepare for TAKE-OFF!—The new Peters/Faucher/Delaune 1:6 scale Bell Jet Belt, shown in unpainted front view. On sale now! (Photo: Wayne Faucher) Exclusive to The Joe Report

Will Sell For Less Than Half the Price of Proposed Version by Executive Replicas 

Longtime contributor, field reporter, and expert customizer of 1:6 scale, Wayne Faucher, wrote in recently with the following exciting new product intel—exclusively for readers of The Joe Report!

exclusivebanner

malecomment

waynefaucherheadshot

Wayne Faucher (Photo: WFT)

“Hi Mark! I thought I’d let you in on this first. No one, outside of the 3 people involved in this project, has seen this yet. So…if ya wanna share it, you and your readers will have the exclusive intel first—and I know you all dig that! 

You may recall my Lost in Space John Robinson (with the Jet Pack) custom garnered some notice a few years ago within the 1/6 community (see our article on that amazing custom by Faucher HERE, ed.). Afterwards, I had a ton of people inquire about the possibility of mass-producing a 1/6 Bell Rocket Belt. Well, that project didn’t seem feasible at the time. But now, with the advent of 3D printing—it’s become a reality!”

jetpack2

3/4 View (Photo: Wayne Faucher) Exclusive to The Joe Report

“I’ve been consulting with the amazingly talented Harry Peters, a 3D designer in the UK who makes his work available through the cutting-edge Shapeways website. Make no mistake—this is really Harry’s baby. He poured his heart and SOUL into it after my friend Roland Delaune and I showed him my initial prototype and inquired if it was even possible to produce.”
jetpack1

Harry’s Got Your Back— The curved backshield of Peters’ Bell Jet Belt conforms to the body of any James Bond, Lost in Space, or Adventure Team “Rocketeer” figure. Absolutely AMAZING attention to detail from every angle. (Photo: Wayne Faucher) Exclusive to The Joe Report

“Harry seemed pretty confident that such an item could in fact be done, and so we proceeded. I acted as a consultant and provided some reference materials, being careful to point out the (many!) inaccuracies of my prototype. Well, Harry not only rose to the task but he clearly surpassed any expectations that Roland and I had.”
jetpack3

Exploded View reveals the various parts of the pack, including jet nozzles, tanks and back shield. WOWZA! (Photo: Wayne Faucher) Exclusive to The Joe Report

“When it comes to accuracy and detail, Harry’s 1:6 Rocket Belt leaves my scratch-built version in the dust! It’s currently available for sale over on the Shapeways site HERE. No, it’s not cheap. But with word that the Executive Replicas John Robinson figure w/Jetpack may have been indefinitely delayed (see HERE), this really is IT when it comes to a 1/6 scale Rocket Belt. And it’s available NOW for less than HALF the price!”
jetpack4

Fits like a glove—Mr. Bond seems quite happy with the scale and extraordinary quality of Mr. Peters’ Jet pack. Now… let’s go get SPECTRE! (Photo: Wayne Faucher) Exclusive to The Joe Report

“Again, I was really just a consultant and cheerleader on this project, Roland was the one who first hooked up with Harry for a few other Lost In Space pieces and Harry was the (very) creative force behind it all. Also, note that these images feature the 1/6 Bell Rocket Belt right out of the box. NO DETAILING or painting has been done, so you can imagine how dynamite this thing would look with a little work! And I want to be clear about one more thing: Roland and I aren’t making a DIME off of this product. We just appreciated Harry’s work so much that we thought it deserved to be shared with a wider audience than just the two of us. Enjoy!” —WEF
We knew our faithful readers would want to know more about the realities of the 3D product-making process, so we decided to contact the inimitable Harry Peters directly. Thankfully, he quickly replied and generously provided the following exclusive insider-intel:
malecomment

“The Bell Rocket Belt has been far and away the most rewarding modeling commission I’ve had the pleasure to work on. Despite source material differing greatly between various versions of the pack that existed, Roland, Wayne and I eventually found enough high-resolution images from the prop used in the James bond film Thunderball and of the ‘Bell No. 2 Rocket Belt’ (one of the last remaining examples in good condition, which currently resides in the Smithsonian National Air and Space Museum) to piece together an accurate reconstruction.”

jetpack6

Side view (Photo: Wayne Faucher) Exclusive to The Joe Report

“Since we’d managed to gather so much quality reference material, I decided to try and make it as accurate as I possibly could, down the the finest details I could glean from the photographs, (even going as far as to add a pivoting hinge so the rockets could be directed using the handles). I kind of ran away with it, unsure exactly how well these tiny details would resolve when printed at 1:6 scale. What I ended up with was this design with a level of detail more accurately represented a 1:1 scale replica as opposed to 1:6!”

jetpack5

Back View (Photo: Wayne Faucher) Exclusive to The Joe Report

harrypeters

Harry Peters, UK (Photo: Harry Peters)

“The risk of course was how well these details would actually come across once 3D printed, and there’s always an element of risk when you’re 3D printing with a company like Shapeways, since all the printing and shipping is handled by their engineers in their own factory. Because of this, I rarely get to see my own designs outside of my computer screen as I’m entrusting the task of making them a reality to a third party. Thankfully, though, Shapeways are incredibly good at what they do and, despite working with them for the past 3 years now, the level of detail that they are able to reproduce always surprises me!I’m currently looking forward to adapting the design of the Bell Rocket Belt to match the famous Lost in Space Jetpack prop (bicycle seat and all!) to list alongside the original recreation.” —Harry Peters, UK

We also wondered about Roland Delaune’s contributions to this outstanding new product. Thankfully, Roland promptly sent in his own exclusive intel revealing the following:

malecomment

Roland H. Delaune

Roland Delaune (Photo: Roland Delaune)

“I actually met Wayne inadvertently through The Joe Report when I read your August 25th, 2012 article on him. I have been a HUGE  fan of the Irwin Allen series Lost In Space since I was about six years old, and when I saw the absolutely AWESOME custom figures that Wayne had made (John Robinson with Jet Pack, and John with Space Suit) I knew I had to have them.

Not expecting  a reply, I messaged Wayne over on The Trenches Forum and asked him about his custom Lost In Space figures. I was shocked when he not only answered me, but answered question, after question, after question, on ad nauseam! We have since gone on to be good friends.

I stumbled onto Harry Peters in much the same way, but through Shapeways Inc. I was looking through the Shapeways website when I noticed a 1/6 scale Lost In Space helmet for sale. It was very similar, but was different in a lot of ways from the version used in the TV show. I bought that one and tried to adapt it to make it look more like the original, but in the end I ruined it.

I messaged Harry and asked if it would be possible to make some changes to the design, and he said yes! So that started a series of back and forth emails, with myself making suggestions and Harry making the changes. After about 15 emails, Harry had changed his
design to match the on-screen version exactly.

Wayne and I both bought versions of the re-designed helmet, and Harry went on to create the backpack (which Wayne had originally built from scratch), a 3-button control panel that attaches to the red vest on the space suit, and even a 1st season Lost In Space laser pistol. All of these products are now on sale on Shapeways through Harry’s shop, MiniatureMachine.

After seeing what could be done with 3D printing and Harry’s talent, the Bell Rocket Belt was the next logical step. The rest, as they always say, is 1:6 history!” —Roland Delaune

Bottom Line: The advent of 3D printing and the increasing use of it by 1:6 scalers is an exciting development in our beloved hobby. Apparently, if we can dream it, talented people like Wayne, Roland and Harry can make “it” become a reality! Our sincerest thanks to all three gentlemen for their generous contributions to the hobby (and to this article). You guys are the BEST! —Mark 🙂

Tagged , , , , , ,

1:6 Customizer, Gary Stair, Inspired By the Work of Wayne Faucher, Creates His Own Versions of Captain Action Battle Armor and 1960s Jet-Packs

garystair58

Creative Minds Think Alike— Inspired by the masterpieces of 1:6 scale wizard, Wayne Faucher, fellow customizer, Gary Stair (of Pennsylvania), combined another assortment of unrelated parts (including a set of Hulk Buster armor, a plastic Easter egg, a Star Wars figure and a Classic Collection GIjOE headsculpt) to create his own unique “B.A.D.A.S.S.” custom toy for use with his favorite hero—Captain Action. Out-STANDING work, Actioneer! (Photo: Gary Stair) Click to enlarge (and drool).

Like birds of a feather, customizers of 1:6 scale do indeed, “flock together.” In today’s exclusive, generously penned and provided to us by 1:6 customizing expert, Gary Stair (PA), we learn exactly how the work of one creative genius can quickly influence the work of many others. In the following two examples, Stair reports how his own custom work (as of late) has become greatly influenced by that of fellow customizer, Wayne Faucher; even to the point of requiring him to jump in his car and race over to Walmart, just to buy an Iron Man toy that was going on clearance. According to Stair:

exclusivebanner

malecomment

garystair

Gary Stair (PA) (Photo: Gary Stair)

“I want to be Wayne Faucher in my next life. I LOVE his 1:6 scale custom stuff! So much so, I often try to emulate him in my own 1:6th creations. The recent Joe Report article describing his amazing Hulk Buster figure (HERE) had me out of my house in minutes and ZIPPING over to the local Walmart; where low and behold—I found one LAST Hulk Buster (HB) figure still sitting on the clearance shelf. Thanks to Wayne’s tip, I snagged it for a mere $11 bucks—with an additional 10% off!

The HB was missing its helmet, but that didn’t stop me. I found a plastic easter egg (clear on one side, yellow on the other) to serve as a replacement, leaving only a few additional items to make it complete. (Hey Wayne—Can you tell what I did over the weekend?) After multiple hours of painting and assorted customizations that utilized all sorts of miscellaneous parts and “do-dads” (to create self-balancing rockets and heat-seeking missiles), I’d soon created my very own Captain Action B.A.D.A.S.S. (short for what else?): the BATTLE ARMOR DEFENSE AIRBORNE SURVIVABILITY SYSTEM. I also intend to install an Iron Man-esque chest light, utilizing one of those 1:6 scale desk lamps I’d purchased previously at a Dollar Store (see HERE).”

garystair62

EGGX-cellant! Gary’s superb solution to his missing helmet dilemma was to create one of his own using a 2-piece plastic Easter egg. Absolutely ALIENS-inspired! (Photo: Gary Stair)

garystair61

Custom Armor-O-ACTION! Gary’s decision to go with a metallic blue paint job gave his custom creation a definite Captain Action twist. Sweet! (Photo: Gary Stair) Click to enlarge.

garystair60

Built For Battle— The back view reveals there are few if any weak spots in the Hulk Buster armor. The possibilities for customizing this “suit” are practically limitless! (Photo: Gary Stair) Click to enlarge.

garystair59

As seen from the side— Gary’s Hulk Buster armor sports one of Cap’s logo stickers (just so Dr. Evil knows who’s about to deliver the HURT on his squishy-brain head) and you can also see how Stair’s unique “Easter egg” helmet was painted and utilized. COOL! (Photo: Gary Stair)

“To further demonstrate how Wayne’s creations have been keeping me up at night, I tried to replicate his outstanding Lost in Space jet-pack (shown in a previous Joe Report article HERE). I also really love the scene in Thunderball where Bond uses the same jet-pack system to make his getaway from SPECTRE bad guys (see video clip above). Thanks largely to Wayne’s inspiring examples, I now have a Sean Connery 007 figure flying high in my toy room with a Wayne Faucher-esque jet-pack (or at least my version of it).”
garystair56

Do you own a 1:6 scale jet-pack system for use with your custom Lost in Space or James bond figures? If not, WHY not? Just like Wayne and Gary, you can make one yourself! Hey, Gary, where’s the helmet? (Photo: Gary Stair)

garystair55

Prepare for Takeoff— Gary Stair’s custom jet-pack was created from an assortment of, as he likes to call them, “odds-n-ends.” WOW!!!!! (Photo: Gary Stair) Click to enlarge.

“I want to give major KUDOS to Wayne Faucher for all the inspiration he’s provided to me and other 1:6 customizers around the world. I hope The Joe Report will continue sharing examples of his amazing work of 1:6 seale ART well in the future. I know they’ve inspired MANY customizers to strive for greater achievements and help keep our beloved 1:6 scale “vision” ALIVE!” —Gary Stair, PA

waynefaucherheadshot

Wayne Faucher (Photo: WFT)

Bottom Line: Gary mentioned that he had grown up watching ARK II. We had never seen (or heard of) “ARK II” before, so we decided to check it out on YouTube today where we found the entire first episode (see link above). If you jump ahead to the 5:49 minute-mark, you’ll see the very same jet-pack system that Wayne and Gary have recreated so perfectly in 1:6 scale.

Wayne and Gary are both outstanding customizers and are leaders by example in our wonderful hobby. We hope these two “wizards” will stay in touch often, and that YOU too, will write in to us here at The Joe Report so that we can share YOUR creative projects with the world. Finally, a special note of thanks to Gary Stair for all his generous contributions to this article. Go, GARY!

Tagged , , , ,