Catching Up With: Robin and Skip Are———Pioneers in the Design and Production of 1:6 Scale Civilian Clothing For G.I. Joes and Other Action Figures

Jason Stone is a big fan of the classic comic book superheroes. He ask us to make him a cape and trenchcoat for his version of the Crimson Avenger. He customized the craft store cowboy hat, added the chain closure to the cape and the mask, and came up with a very sharp looking figure. "Super" job Jasonl!

According to Skip Are, “Jason Stone is a big fan of the classic comic book superheroes. He asked Project ARE to make him a cape and trenchcoat for his version of the Crimson Avenger. He customized the craft store cowboy hat, added the chain closure to the cape and the mask, and came up with a very sharp-looking custom figure.” (Photo: Jason Stone)

Skip Are, the self-described "General Flunky" of Project ARE Action Outfitters. (Photo: )

Skip Are, the self-described “General Flunky” of Project ARE Action Outfitters. (Photo: Chickenfat)

“Being small, we are able to offer a level of value, service and flexibility that is not possible with mass-produced or overseas production.” —Skip Are, Project ARE Action Outfitters

When it comes to outfitting your next 1:6 scale custom figure with good ol’ civilian “basics” (i.e. t-shirts, shorts, shirts, pants, coats, etc.) that are affordable, available in a variety of colors and styles, and are expertly sewn and readily available, one name and number should immediately leap to the top of your speed-dial: Project ARE.

If you’re a collector or (even better), a customizer of 1:6 scale, we’re probably already preaching to the choir. But if for some reason you’ve never seen the work of uber-talented seamstress Robin Are and her ever helpful husband Skip Are, then listen up my friend; because we’re about to provide you with some VERY valuable “insider intel.” We contacted Skip at home recently and he kindly consented to the following exclusive interview. Herrrrrrre’s Skip!

This image of The Joe Report's own Sea Sled Team, reveals three orange-suited scuba divers all set for action, each outfitted in Project Are's amazing lycra scuba suits. Their fit and detailing is superb, and we don't have to worry about them dry-rotting or sticking to the sleds. Outstanding! (Photo: Mark Otnes)

This image of The Joe Report’s own Sea Sled Team, reveals three orange-suited scuba divers all set for action, each outfitted in Project ARE’s amazing lycra scuba suits. Their fit and detailing is superb, and we don’t have to worry about them dry-rotting or sticking to the sleds. Outstanding! (Photo: Mark Otnes)

exclusivebanner

Skip's own custom "Hardy Boys," outfitted in some of Robin's superb 1:6 scale flannel shirts and bluejeans. (Photo: Skip Are)

Skip’s custom “Hardy Boys,” outfitted in some of Robin Are’s superb 1:6 scale shirts and jeans. (Photo: Skip Are)

TJR: Before we begin, I just wanted to tell you tell you how BIG a fan I am of Project ARE, and of Robin’s and your work and contributions to the 1:6 scale collecting community. I’ve purchased a few of your scuba suits and t-shirts and I absolutely LOVE the fit and quality!

“Thanks. And it’s good to hear from you again, Mark.

TJR: I know you’ve been a GIjOE fan and collector since 1964 and that your wife, Robin, was in the Navy and has been sewing clothing and accessories for 12″ action figures since 1996. But could you remind our readers about “the early days” and your connections to Adventure Gear? I have to admit I’m a little “late to the party” on that subject. Who did what for whom?

“Robin and I started making a few things in the mid-90’s, before we had ever met Tom Calhoun. Things like sandbags, T-shirts, shorts, that sort of thing, and we sold them at local toy shows. There were a few military customizers at the time, but no one was making civilian type clothing. Then I ‘met’ Tom through the old Sandbox, and we starting discussing having a website to sell stuff. Tom made suggestions of product, and we did what we could to make them.”

Rex Kwiecien outfitted this Joe in one of Project Are's reproduction 'Fight For Survival' arctic outfits to create an Israeli arctic explorer. Fan-FREEZING-tastic! (Photo: Rex Kwiecien)

Rex Kwiecien outfitted this GIjOE in one of Project Are’s repro ‘Fight For Survival’ arctic outfits to create an Israeli Arctic Explorer. Wow! (Photo: Rex Kwiecien)

“Then Tom established Adventure Gear and we made the items for him. He accepted the orders, and we filled them from here. Robin did all the design work and all the sewing, and we did 3 shows with Tom. Things were really growing for us all, and we even produced a couple of sets for the Sandbox, the ‘Sandstorm Rescue’ set and the ‘Return to Spy Island ‘set.”

TJR: Sounds like a very successful beginning for any 1:6 business. What else did you work on?

“Well, we had flocked Cots action figures for sale LONG before it became common to have figures flocked. And we carried lots of accessories too. We even did some commercial work for Burton Snowboards and Trinity Communications. Oh! We were also featured on the back of ‘Outdoors Magazine’ once!

Project ARE's superb "Pirate" outfit features a unique lace-up front. Tremendous detail! (Photo: Skip Are)

Project ARE’s superb “Pirate” shirt features a unique lace-up front. (Photo: Skip Are)

TJR: Outstanding. What happened next?

“Well, after a couple of years, Tom found someone in Charlotte who could arrange to have things sewn in China. So…he decided at that point that some of our more popular items could be made there. We went our separate ways, and Tom continued on with Adventure Gear, having items that Robin had designed sent to China to be copied, and also sending more original AT items there as well. He was selling stuff up until a couple of years ago, but I have no idea whether he is anymore.

TJR: I see. So, is that when you and Robin decided to form your own company?

This superb custom Adventure Teamer created by Alan Grabie is wearing khaki pants with cargo pockets, a turtleneck with embroidered AT patch, and an elastic web belt—all made by Project ARE. WOW! (Photo: Alan Grabie)

This superb custom Adventure Teamer created by Alan Grabie is wearing khaki pants with cargo pockets, a turtleneck with embroidered AT patch, and an elastic web belt—all made by Project ARE. Outstanding! (Photo: Alan Grabie)

“Yes, we took about a 6-month hiatus after the split while we decided what to do, and finally started “Project ARE Action Outfitters” to continue producing many of the items we had done before, plus some new things that we wanted to make that Tom had no interest in. That was in 2001. We also did some custom work for the likes of Fred Jeska, Mike Cherry, Jim Marianneti of ACES (an early customizer), and John Ivory of ‘John’s Stuff.’ We have continued to make things, dropping many items and adding some, as the tastes of our customers have changed.”

TJR: Excellent. And of course we know that you have a great, easy-to-use website (HERE). But what about Joe Cons and toy shows? Do you ever set up there as a dealer?

“We did a few conventions, then decided that it was just too much work for the two of us. We primarily use the website now.”

TJR: I see. What about Dan Dibiase? We see the figures in his elaborate dioramas wearing a lot of what appear to be your company’s clothes. Is he connected to Project ARE?

“Dan is an excellent photographer and diorama builder, and Tom gave Dan an online home to post his stories and photos on. We’ve actually made a few things for Dan a few years back, but most of the clothing you see in his photos came from Tom. So no, neither Tom nor Dan have ever worked for Project ARE.”

Adventure Gear fills a unique niche in the 1:6 scale hobby, providing top quality outdoor clothing items for your Adventure Team. (Photo: Dan Dibiase, Deering Productions)

Another outstanding Dibiase Diorama. (Photo: Dan Dibiase, Deering Productions)

Bottom Line: Our sincerest thanks to Skip Are for clearing up all the questions fans have long wondered about. We want to wish him and Robin all the best in their future 1:6 endeavours. Skip sums up their outstanding 1:6 scale business this way:

“Project ARE Action Outfitters is a small company dedicated to providing quality made and unique clothing and accessories for the 1/6 scale action figure hobby. We spend a great deal of time and effort designing and making what we sell, and our goal is to offer only those items which can reflect that effort. We want to satisfy our customers, not through phony slogans or hidden agendas, but through hard work and honest effort.”

FLASHBACK! Robin and Skip Are pose with friend and fellow 1:6 dealer, Barry Vedros (left), many years and many pounds ago, at Joelanta 2002. (Photo: Barry Vedros)

FLASHBACK! Robin and Skip Are pose with their good friend and fellow 1:6 scale dealer, Barry Vedros (left), many years (and many pounds) ago at Joelanta 2002. (Photo: Barry Vedros)

Advertisements

3 thoughts on “Catching Up With: Robin and Skip Are———Pioneers in the Design and Production of 1:6 Scale Civilian Clothing For G.I. Joes and Other Action Figures

  1. Captain action says:

    Project ARE are great outfitters for GIjOE and Action Man.

  2. Wayne Faucher says:

    I have 2 of their lycra scuba suits. They display really well, and I NEVER need to worry about rubber rot again! SWEET!

  3. Frank Perry says:

    How do I locate and purchase these Project ARE’s lycra scuba suits.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: